Product specification

• Size range:                                    - From 10" to 36" pipeline
• Pressure rating:                              - Maximum inflation to 4,5 psi Recommended sealing pressure: 1,5 psi
• Pressure relief valve:                      - Factory set at +/- 1,3 psi
• Available ports on Primary bag:        - Inflation/purge, Bleed & By-pass
• Available ports on Secondary bag:    - Inflation/purge & By-pass
• Sealing type:                                 - Inflatable Latex rubber bladder with nylon cover
• Activation:                                     - Gas inflatable (Air, Nitrogen or Argon)
• Inner bladder type:                        - Latex sheet rubber, excellent resistance to Hydro Carbon gases
• Outer Nylon cover material:               - Nylon fabric with the following properties:
• Warp tensile strength = 4100N/50mm
• Weft tensile strength = 4000N/50mm
• Warp Elongation = 40%
• Weft Elongation = 26%
• Temperature resistance Nylon cover:  - Maximum temp.   150ºc
• Heat shield material:     - The heat shield fabric is Aramid which is treated to give anti-static properties.
• Heat shield resistance:                        - Maximum temp.  + 400ºc
• Product shelf life expectancy:                        - A maximum of approximately 3 years
• Safety features:                                  - Fastened Eyes on either side of the bags for Carabina type safety wire hook up connection

Content under revision

BOLT LOAD CALCULATION

• Tightening data for BS 1560, MSS SP44, API 6A and 17D flanged joints.
• Encompasses standard flanges, wafer check valves, spade and spacers, and swivel flange assemblies.
• Torque data and tensioning tool pressures for both subsea and topsides applications.
• Bolt extension calculations.
• Tightening procedures and torque sequences.
• Joint specific recommendations for imroved integrity.
• Large database of bolt materials.
• Large database of bolt lubricants.
• Dimensional data of flanges.
• Recommended bolt lengths.
• Large database of bolt materials.

Content under revision

Content under revision

Content under revision

Product specification

Application of concrete and grouted solutions for platform life extension and repair and use of grouting into sealing compartments

• Reinforcement of structural members
• Injection of high grade concrete
• Injection of sealant material

Product specification

IK design and deliver mechanical connectors for piping and pipelines. The connectors are mechanical set on the cut / not prepared pipe ends by use of torque bolts or by hydraulic. The connectors can be delivered with elastomer sealing or metal to metal sealing. Structural integrity is secured by mechanical teeth elements

• Pipe dimensions, ½" - 36"
• Design pressure, 0 - 600 bar
• Sealing philosophy, Single or double w. test port
• Structural integrity, Mechanical teeth elements
• Material, Customer design

Content under revision

Product specification

IK Design, manufacturing and delivery of specialized solutions for modification and repair
of piping and pipeline systems.

Pipeline, riser and conductor repair and modifications

Support structures and support equipment

Content under revision

Content under revision

Content under revision

Product specification

IK design specialized solutions for modification and repair of piping and pipeline systems.

IK can deliver detail engineering or early phase studies.

Special design required for non-standard  issues and purposes is the IK niche competency

Product specification

IK have competence and tools for epoxy injection related to repair and sealing of various systems and components.

• Pipe penetration leakage repair
• Injection of epoxy into leaking sealing systems
• Injection of epoxy into repair clamps
• Injection of epoxy as sealing into permanent pipe plugs

Content under revision

WIRE ROPE FLANGE PULLING SYSTEM

• Compact design
• Long piston stroke
• Self activating collet design
• Auto grab anchor collet with hydraulic release
• Manually releaseable retract collet prevents lock on
• High strength, low rotation wire rope
• Anti-slip surfaces
• Operated via seperate diver control valve providing precise control for up to 4 pullers

THREADED BAR FLANGE PULLING SYSTEM

• Compact design
• Long piston stroke
• Rapid assembly using quick release reaction nuts
• High strength threaded bar
• Anti-slip surfaces
• Operated via seperate diver control valve providing precise control for up to 4 pullers

Content under revision

Product specification

• Pipe ID Range:                                   All Pipe Schedules
• Max test Pressure:                              380 Barg standard( 652 Bar Special)
• Test Fluid:                                           Water or nitrogen
• Pipe Orientation:                                 Any
• Means of installation/Removal:          Mechanical means (Push/Pull)
• Means of activating:                           Mechanical
• Dimension:                                          Available upon request
• Weight:                                                Available upon request

Product specification

IK design and deliver mechanical flanges for piping and pipelines. The flanges are mechanical set on the cut / not prepared pipe end by use of torque bolts. The flanges can be delivered with elastomer sealing or metal to metal sealing.  Flange interface to meet any client requirements.

• Pipe dimensions,½" - 36"
• Design pressure, 0 - 600 bar
• Flange interface, Customer design
• Sealing philosophy, Single or double w. test port
• Material, Customer design

Content under revision

Liquid carbon dioxide (CO2)

Pipe freezing is a method by which pressure resistant plugs are formed by the freezing of liquid contained within a pipe, using an externally applied coolant. Such plugs may be used to provide temporary isolation, allowing sections of plant or pipeline to be modified, maintained or repaired.  Freeze isolations may withstand very substantial pressures, and may be maintained indefinitely, provided the exterior of the pipe is cooled continuously.

Pipe Freezing or "Ice Plugging" has been used for more than 70 years and is now a common practice in building maintenance and countless applications in the piping industries

IK Offers three different methods for freezing plugs in water filled systems:

• Liquid Nitrogen
• Liquid CO2
• Alcohol and CO2 pellets

Please contact IK's Pipe intervention department for more information.

Service description

Pipe freezing is a method by which pressure resistant plugs are formed by the freezing of liquid contained within a pipe, using an externally applied coolant. Such plugs may be used to provide temporary isolation, allowing sections of plant or pipeline to be modified, maintained or repaired.  Freeze isolations may withstand very substantial pressures, and may be maintained indefinitely, provided the exterior of the pipe is cooled continuously.

Pipe Freezing or "Ice Plugging" has been used for more than 70 years and is now a common practice in building maintenance and countless applications in the piping industries

IK Offers three different methods for freezing plugs in water filled systems:

• Liquid Nitrogen
• Liquid CO2
• Alcohol and CO2 pellets

Please contact IK's Pipe intervention department for more information.

Carbon dioxide & Alcohol

Pipe freezing is a method by which pressure resistant plugs are formed by the freezing of liquid contained within a pipe, using an externally applied coolant. Such plugs may be used to provide temporary isolation, allowing sections of plant or pipeline to be modified, maintained or repaired.  Freeze isolations may withstand very substantial pressures, and may be maintained indefinitely, provided the exterior of the pipe is cooled continuously.

 Pipe Freezing or "Ice Plugging" has been used for more than 70 years and is now a common practice in building maintenance and countless applications in the piping industries

IK Offers three different methods for freezing plugs in water filled systems:

• Liquid Nitrogen
• Liquid CO2
• Alcohol and CO2 pellets

Please contact IK's Pipe intervention department for more information.

GREASE NIPPLES, HIGH PRESSURE

• Valve technician safety
• Reduce leakage into the environment
• Reduce emergency shutdown
• Fix the correct calculation steps to avoid dangerous valve fitting design
• New design anti-blowout solution
• Metal to metal seal recommended for fire safe application
• No leakages

Product specification

Tools for application of concrete and grouted solutions for platform life extension and repair and use of grouting into sealing compartments

• Injection of concrete into structural members
• Injection of concrete into repair clamps
• Injection of high grade concrete
• Injection of sealant material

Product specification

Application of concrete and grouted solutions for platform life extension and repair and use of grouting into sealing compartments

• Reinforcement of structural members
• Injection of high grade concrete
• Injection of sealant material

TOPSIDE POWERPACK

• 1500 bar (21750psi)
• Calibrated 150mm (6") pressure gauge
• Flow rate up to 0,72 litres/min. (44cu.in/min.)
• Dual oil outlets with quick-connect no spil couplings
• Phneumatic filter/regulator/lubricator
• Air consumption 800 litres/min. (28 cfm)
• 9,5 litre ( 2 gal.) polyethylene reservoir
• Stainless steel carrying frame

SUBSEA POWERPACK

• Flow rate up to 1,14 litres/min. (70 cu.in./min.)
• Air consumption 1600 litres/min. (56 cfm)

PREDATOR AIR/HYDRAULIC TORQUE WRENCH PUMP

• Quiet operation
• Light weight for easy potability
• Rugged construction for durability in tough environments
• Fewer parts for lower service costs
• CE
• ATEX
• EXII 2 GDc T4

Content under revision

Content under revision

Content under revision

• Lightweight body design
• Interchangeable ratcheting heads
• Tool free head change
• Auto-connect drive mechanism
• Fine tooth ratchet drive eliminates dangerous anti-wind up devices
• Built-in reaction pad
• Multi-axis hose swivel
• Flat, slim-line design for low headroom applications
• Small nose thickness for tight radial clearances
• Careful material selection ensures long life and durability

Our precision top collar hydraulic nuts offer a quick, accurate and cost effective solution to simultaneous tightening of multiple boltet joints.

• Compact enough to fit the most confined spaces
• Maximum load generated at 1500 bar (21750 psi)
• Energised from either a hand operated or air driven pump
• Custom hydraulic nut designs available in short timescales
• Alternative bottom collar and shim type versions available

IK DESIGN BOLT

• IK designs bolts for both subsea and topside in all materials
• Special nuts and bolts

Content under revision

Content under revision

Product specification

• Pipe ID Range:                                   All Pipe Schedules
• Max test Pressure:                              70 Barg standard
• Test Fluid:                                           Water or nitrogen
• Pipe Orientation:                                 Any
• Means of installation/Removal:          Mechanical means (Push/Pull)
• Means of activating:                           Water
• Dimension:                                          Available upon request
• Weight:                                                Available upon request

Product specification

• Pipe ID Range:                                   All Pipe Schedules
• Max test Pressure:                              380 Barg standard( 652 Bar Special)
• Test Fluid:                                           Water or nitrogen
• Pipe Orientation:                                 Any
• Means of installation/Removal:          Mechanical means (Push/Pull)
• Means of activating:                           Mechanical
• Dimension:                                          Available upon request
• Weight:                                                Available upon request

Product specification

• Pipe ID Range: All Pipe Schedules
• Max test Pressure: 380 Barg standard( 652 Bar Special)
• Test Fluid: Water or nitrogen
• Pipe Orientation: Any
• Means of installation/Removal: Mechanical means (Push/Pull)
• Means of activating: Mechanical
• Dimension: Available upon request
• Weight: Available upon request

Content under revision

SERVICE

IK perform Pipe Interventions on live systems, hence increase uptime.

IK is performing line stopping on live systems in order to perform interventions which otherwise require shut down. IK’s methods for line stopping will be adapted to the need of the customer. The service includes definition of method, preparation and verification of method and operation in the plant.

The method is widely used on utility and safety systems, systems which does not shut down in shut downs:

• The method brings an isolation(barrier) into the live system.
• Allows the intervention
• Maintain system operation during intervention
• Leaves the system fully operational, on specification

The service allows:

• Pipes to be cut and reconnected / rerouted
• Valves to be repaired
• Blind flanges to be removed

The method includes:

• Hot tapping for stopple plugging
• Hot tapping elbow for introduction of HP plug
• Hot tapping blind flange for introduction of HP plug
• Line sopping plugs are set during system operation and the system pressurized
• Freeze plugging

Content under revision

Content under revision

Product specification

• Pipe ID Range: All Pipe Schedules
• Max test Pressure: 0 - 3 Bar ( 3 - more on special)
• Test Fluid: Water or nitrogen
• Pipe Orientation: Any
• Means of installation/Removal: Mechanical means (Push/Pull)
• Means of activating: Water
• Dimension: Available upon request
• Weight: Available upon request

Content under revision

Content under revision

• Triple edge disposable cutting blade
• Blade positioning scale to eliminate bolt damage
• Cutting depth adjusted by rotating the cylinder
• Size range from 3/4"-3 1/2" bolt diameters
• Designed to fit BS1560/ANSI 16.5 flanges
• Special subsea versions available
• Versatile, reliable and trouble free operation

Content under revision

Content under revision

Content under revision

Content under revision

Group       Separation, batching, displacement and hydrostatic testing

Group          Cleaning

SB2CC-CB Pigs size 4"-14" are designed for removal of deposits from the inner pipe wall and/or construction debris.

SB2CC-CB Pigs are manufactured with a steel welded body single bolt design, polyurethane protector nose and a hoisting facility in front.

SB2CC-CB Pigs are fitted with 2 conical heavy duty polyurethane long distance driving cups which are easily replaceable, and create a perfect seal.

SB2CC-CB Pigs are equipped with 2 circular carbon steel wire brushes and are, as the cups, easily replaceable.

SPECIFICATIONS

PolyEurope poly foam pigs are industrial pipeline and municipal water main cleaners and product recovery devices. The basic design consists of a flexible, bullet shaped polyurethane foam cylinder. The rear end of the PolyEurope poly foam pig is concave in order to allow more pressure to be exerted and create a tighter seal against the pipe wall. This helps to prevent "by-pass" of the propelling agent (water, air or product) and virtually eliminates product contamination.

Overall length of PolyEurope poly foam pigs (Medium and High densities) are approx. 2 times the diameter of the pipeline and oversize of the bare pigs varies between 0.25"and 0.75" depending on size of pig and pipe grade.

Group          Gauging

SB2C-GP Pigs size 4"-8" are designed to indicate obstructions, proving the roundness of pipelines.

SB2C-GP Pigs are manufactured with a steel welded body single bolt design, polyurethane spacers, protector nose and a hoisting facility in front.

SB2C-GP Pigs are fitted with 2 standard polyurethane scraper cups which are easily replaceable, and create a perfect seal. SB2C-GP Pigs are equipped at the front with an aluminium gauging plate (conventional or slotted) which is as the cups, easily replaceable.

General function and application

Indicate obstructions, proving the roundness of pipelines and/or removal of construction debris.

SB2C-GP Pigs are designed for passing 1.5D radius bends and will traverse full-size branch openings.

Content under revision

Content under revision

Content under revision

Group       Separation, batching and displacement

SB2CC Pigs size 4"-14" are designed for product separation, batching and displacement operations.

SB2CC Pigs are manufactured with a steel welded body single bolt design or a flexible body design, polyurethane protector nose and a hoisting facility in front.

SB2CC Pigs are fitted with 2 conical heavy duty polyurethane long distance driving cups which are easily replaceable, and create a perfect seal.

General function and application

Removal of debris, liquid evacuation, product separation, batching and displacement.

SB2CC Pigs are designed for passing 3D radius bends and will traverse full-size branch openings.

SB2CC Options available

• Aluminium gauging plate

By pass plugs

Content under revision

Content under revision

Product specification

IK design and deliver clamps for piping and pipelines. The clamps can be designed for a large variety of dimensions and pressure classes and for several purposes such as tie in, hot tap, repair, reinforcement....etc

• Pipe dimensions, ½" - 36"
• Design pressure, 0 - 600 bar
• Sealing philosophy, Single or double w. test port
• Material, Customer design
• Setting, Torque bolts or hydraulic

Product specification

IK design and deliver clamps for piping and pipelines. The clamps can be designed for a large variety of dimensions and pressure classes and for several purposes such as tie in, hot tap, repair, reinforcement....etc

• Pipe dimensions, ½" - 36"
• Design pressure, 0 - 600 bar
• Sealing philosophy, Single or double w. test port
• Material, Customer design
• Setting, Torque bolts or hydraulic

Product specification

IK design and deliver clamps for repair of structures, risers and pipelines. The clamps can be designed for a large variety of dimensions and load situations

• Pipe dimensions, ½" -  100"  ( client defined )
• Installation, ROV, Diver, Remote og Operators
• Material, Customer design
• Setting, Torque bolts or hydraulic

Product specification

IK design and deliver subsea recovery tools for a large variety of purposes. Typical tools are for handling, lifting and holdback for pipelines and riser. IK has a staff with broad subsea experience and we have designed, delivered and operated several types recovery tools

• Typical load capacity : Typical up to 500 Te
• Internal pipeline recovery: PRT, 4" to 36".
• Flushing facility: Typical 2" with ROV operated valve
• Isolation facility: Single or double packers with test port

Product specification

IK design and deliver pipeline clamping tools for a large variety of purposes. Typical tools are for handling, lifting and holdback for pipelines and risers. IK has a staff with broad subsea experience and we have designed, delivered and operated several types of subsea tools.

• ROV operated recovery clamps: 5 Te to 50 Te, 6" - 12" pipes
• Pipeline Hold Back Clamps: 50 Te to 500 Te, 6" - 36" pipes
• Pipeline Midline Clamps: 8" - 36". Typical up to 1000 Te
• External recovery / lifting tool: 4" to 36". Typical up to 500 Te

Product specification

IK design and deliver subsea recovery tools for a large variety of purposes The Pin Through Recovery Tool is special intended for pipelines or pipes / members where the standard PRT tools cannot be used.

• Function: The lifting device is equipped with a drilling unit. The pin is inserted by the drilling operation
• Loads, typical: 10 Te - 1000 Te ( Even larger span may be delivered )
• Pipe dimensions, typical: 6" - 60". ( Even larger span may be delivered )
• Operation: Lifted in by surface crane , ROV operated and controlled

Integrated or separate drilling machine may be used.

Product specification

• Size Range, 1/2" to 48" pipe
• Usage, Topside / Subsea
• Pressure Rating, 0 - 390 bar. (Up to 690 bar, upon request)
• Sealing, Compression seal, single or double
• Physical integrity, Slips with metal teeth elements
• Safety philosophy, Fail Safe
• Test port, Double barrier with test port upon request
• Activation, Mechanical or Hydraulic
• Deployment, Manually or Remotely

Product specification

IK design and deliver ROV operated plugs for piping and pipelines. The plugs can be delivered for a large variety of dimensions and pressure classes and for several purposes such permanent sealing, temporary sealing, test purposes....etc.

• Pipe dimensions; ½" - 36"
• Design pressure; 0 - 50 bar ( Typical )
• Sealing philosophy; Single or double w. test port
• Structural integrity; Slips elements / Packer wedge lock
• Material; Customer design
• Setting; Hydraulic, Mechanical or Impact Wrench.

Product specification

IK design and deliver pipe isolation plugs for remote operation and setting. IK apply several methods for setting the plugs, electrical operated, hydraulic operated or mechanical operated. The plugs to be deployed and recovered by alternative methods as, pigging, mechanical pushing ( coiled tubing ) or by use of tractor. The plugs are not off the shelf products but tailor made for the client project specifications

• Function: Isolating pipes, risers, pipelines
• Dimensions: Typical 2" to 36" ( client specified )
• Pressure rating: Typical 0 bar to 200 bar
• Setting: Hydraulic, Electrical or Mechanical
• Safety: Fail Safe Mechanical Slips System
• Barriers: Single or double with test ports
• Setting range / distance: Typical 0 meter to 100 meter
• Control and Monitoring: Electrical / Camera / Hydraulic / Mechanical Electrical cable, hydraulic lines or mechanical
• Pipe material: Steel, Titanium, Composite and Concrete
• Pipe medie:   Hydrocarbones, Gas, Water....etc                

Content under revision

Content under revision

Content under revision

Content under revision

Content under revision

Content under revision

Content under revision

Content under revision

Content under revision

Content under revision

CABLE CUTTER

• Our cable/wire rope cutters provide a robust range of hydraulic tools capable of quickly clean cutting high tensile steel wire rope up to 2" diameter
• Our cutters are capable of cutting chain, sections of steel and many other materials

Product specification

IK design and deliver pipeline tools for a large variety of purposes. Typical tools for hydraulic connections are the hot stabs.  IK has a staff with broad subsea experience and we have designed, delivered and operated several types of subsea tools.

• Stab dimensions: ¼" to 2" bore
• Number of ports: 1 to 4 ports
• Pressure rating: 50 to 700 bar
• Check valves: Delivered with or without check valves

Content under revision

Content under revision

Product specification

IK design and deliver special custom ROV tools for brushing and cleaning of equipment and components at subsea structures and modules. Typical tools are for cleaning of old pipes, externally and internally. Removal of paint, corrosion and marine growth.

• Pipe dimensions, Client specified
• Brushes, Soft nylon to strong steel brushes
• Function, Hard scale
• Powering and control, Hydraulic / mechanical / electrical
• Remote operation, In pipelines and risers through cable control

Product specification

IK design and deliver special custom ROV tools for cleaning of equipment and components of subsea structures and modules. Typical tools are for cleaning of old pipes, externally and internally. Removal of paint, corrosion and marine growth.

• Pipe dimensions: Client specified
• Flow and pressure: To be specified
• Removal Function: Hard scale, marine growth, painting, corrosion..etc
• Powering and control: Hydraulic / mechanical / electrical
• Remote operation: In pipelines and risers through cable control

Product specification

IK design and deliver special ROV or diver operated tools for cutting and machining operations. IK has a staff with broad subsea experience and the state of the art 3-D tools for efficient design of special tools.

• ROV circle saw cutter for pipes
• Cutter tools for beams and structural members
• Dimensions from 1" to 6"

Product specification

IK design and deliver special custom ROV tools for drilling holes in equipment and components at subsea structures and modules. Typical tools are for drilling into old pipes, externally and internally.

• Pipe dimensions: Client specified
• Hole dimensions ½" - 30"
• Typical applications: Sampling, access, cold / hot tap, lifting points..etc
• Powering and control: Hydraulic / mechanical / electrical
• Remote operation: In pipelines and risers through cable control

Product specification

IK design and deliver special custom ROV tools for grinding and polishing of equipment and components at subsea structures and modules. Typical tools are for grinding and polishing of old pipes, externally and internally, flanges, seal surfaces and other pressure containing components.

• Pipe dimensions: Client specified
• Tools: Large span of varieties, client defined
• Function: Scratch removal, corrosion removal....etc
• Powering and control: Hydraulic / mechanical / electrical
• Remote operation: In pipelines and risers through cable control

Product specification

IK design and deliver pipeline tools for a large variety of purposes. Typical tools for installation of inhibition sticks into pipelines have been delivered for several dimensions and purposes.  IK has a staff with broad subsea experience and we have designed, delivered and operated several types of subsea tools.

• ROV operated tool: One or several sticks in one run
• ROV operated tool: Various length and diameter of sticks
• Tool operation and Control Hydraulic or Mechanical
• Tool weight ROV hand able, 5 kg - 20 kg

Product specification

IK design and deliver special ROV or diver operated tools for milling and machining operations. IK has a staff with broad subsea experience and the state of the art 3-D tools for efficient design of special tools.

• Subsea hot tapping or drilling
• Subsea bolt cutting or nut splitting
• Weld seam removal
• Pipe cutting and beveling
• Seal face grinding or polishing

Content under revision

Product specification

IK design and deliver special custom ROV tools for a large variety of purposes. Typical tools are for handling, cutting, inspection, flushing...etc. IK has a staff with broad subsea experience and the state of the art 3-D tools for efficient design of special tools with short delivery time.

• 3-D design tool: 3-D Inventor
• Facilities: Hydraulic, mechanical and instrumentation workshop
• Mechanical analysis: Ansys
• Engineering: Hydraulic, instrumentation, mechanical, structural
• Machining : Large number of qualified sub suppliers
• Welding: Large number of qualified sub suppliers
• Assembly and testing: Modern workshop facilities

Product specification

IK design and deliver pipeline tools for a large variety of purposes. Typical tools for hydraulic connections are the hot stabs.  IK has a staff with broad subsea experience and we have designed, delivered and operated several types of subsea tools.

• Stab dimensions: ¼" to 2" bore
• Number of ports: 1 to 4 ports
• Pressure rating: 50 to 700 bar
• Check valves: Delivered with or without check valves

Product specification

IK design an "ROV Dredge pump" for Subsea use. An internal valve operated with a hydraulic cylinder allows the operator to choose between flushing and dredging.

The 50mm clearance inside the ejector nozzle makes it possible to remove drill cuttings, sand and mud. This combined with a 1-inch jetting output gives you a powerful tool for cleaning interfaces and connectors.

One main design criteria were to use as few components as possible. The components are made of lightweight material where possible.

Product specification

IK design and deliver subsea ROV operated shackles. The shackles are based on a hydraulic operated pin function, with custom specified functions with regard to interfaces and installation methods. IK has a staff with broad subsea experience and we have designed, delivered and operated several dimensions ROV shackles.

• Dimensions: 25 Te to 150 Te
• Pin operation: Hydraulic
• Pin locking: Mechanically and / or Hydraulically
• Installation: ROV swimming or Lift wire and ROV guiding

Product specification

IK design and deliver subsea tools for a large variety of purposes. Typical tools are for assisting ROVs to keep position in difficult operations with wave currents and other operational issues making station keeping challenging. IK has a staff with broad subsea experience and we have designed, delivered and operated several types of ROV support arms.

• Support function: Vacuum in suction cups
• Support interface: Hinged arm between ROV and suction cup
• Tool powering: Vacuum from hydraulic suction pump
• Tool variations: One or several suction cups, Static or telescopic  arm, Flexible or stiff hinges

Content under revision

 Under Construction

Product specification

• Dimensions / Pressure / Temp, 8" / 169 mm ID  /  207 bar / -15 / 125°C
• Standard / Spec, BS 5500
• Pipeline Medium, Sour, crude oil
• Heat tracing + insulation, Pig receiver only
• Area classification, Zone 1
• Functions, Valves interlocked with closure doors Local operation of launcher/receiver Max surface temp of all equipment 70°C
• Pig detection, Mechanical pig signaler
• Flanges, ANSI B16.5 Ring type joint flanges
• Length, 9 meters
• Width, 3 meters
• Height, 2.2 meters
• Weight, 14 tones

Product specification

IK design and deliver subsea recovery tools for a large variety of purposes. Typical tools are for handling, lifting and holdback for pipelines, risers and other equipment. IK has a staff with broad subsea experience and we have designed, delivered and operated several types of lifting tools

• ROV operated shackles: 35 Te to 150 Te
• Internal pipeline recovery: PRT, 4" to 36". Typical up to 500 Te
• Pile recovery tools: 36" - 92". Typical up to 1000 Te
• Pipeline termination heads: Mechanical locking tools
• External recovery tool: 4" to 36". Typical up to 500 Te

Product specification

IK design and deliver special tool for handling of pigs operated in pipelines. The tools can be delivered for a large variety of dimensions and classes and for several purposes:

• Pig Injector Tool for automatic launching of pigs into launchers
• Washing machines for cleaning pigs
• EX classification
• Closed system for safe waste and pollution handling
• Safe operation in accordance to the Machine Directive.

Product specification

IK Design, manufacturing and delivery specialized solutions for modification and repair
of subsea systems and components.

 Protection structures

 Support structures and support equipment

Product specification

IK design and deliver subsea tools for a large variety of purposes. Typical tools are for monitoring and controlling subsea operations through ROV panels. IK has a staff with broad subsea experience and we have designed, delivered and operated several types of ROV panels.

• Function: Hydraulic control and operations
• Monitoring: Gauges and other displays
• Mechanical: Combined lifting appliances
• Powering: Through hydraulic receptacles

Content under revision

Content under revision

Content under revision

Content under revision

SUBSEA TENSIONER

• Visible piston stroke indication
• Piston/cylinder misalignment compensation
• Anti-slip cylinder surface for improved handling
• Low friction seals
• Anti-corrosion coating
• Bolt coverage from 3/4"-3 1/2"
• Designed to fit BS 1560/ANSI B16.5/API flanges, as well as most compact flange designs

Content under revision

Content under revision

Content under revision

SERVICE

IK perform hot tapping services using its own machines. The machines span from small off the shelf machines to bigger machines capable of large dimension holes on high pressure process systems. The larger machines are of a flexible type which fit well into the compact NCS process plants.

FLEET

IK has hot tap machines to take from ½” to 30” and pressure up to 200 bar in our fleet.

Machines are driven by manual, air or hydraulic.

Below you will find IK`s hot tap application sheet, please fill out this and send to and we will assist on choosing the correct machine, overall dimensions and prices.

You will also see datasheet for some of our machines. More will be added.

Content under revision

Content under revision

• Unique quick release bridge adaptation
• Piston overstroke prevention
• Piston stroke indication
• Piston/sylinder mis-alignment compensation
• Bolt coverage from 1"-3 1/2" with just 4 tools
• Designed to fit BS1560/ANSI B16.5/API flanges
• Fully enclosed load cell design eliminates ingress of debris into piston retraction mechanism

Content under revision

TORQUE TENSION TRAINING

• Flange OLF guideline 118

Content under revision

Content under revision

Content under revision

Content under revision

Product spesifikasjon

Other sizes available upon request